erreur gravure blu ray Options

[chipo1982]

Bonjour a tous
Je souhaite graver des fichiers avi ou mp4 ou autres en tout cas video, sur blu rays verbatim 25 go afin de les conserver et les lire sur platine de salon.
Il y a quelques jours je pouvais graver que ce soit avec cdburner xp et nero mais par contre l'acces aux fichiers depuis mon pc prenait tres longtemps ou etait impossible et le lecteur (media player classic ou vlc finissait par buguer)
j'ai fini par laisser tomber et la je reessaye et impossible de graver que ce soit avec nero ou cdburner....
je n'y comprends rien j'ai un messagfe d'erreur directement en debut de gravure avec l'un ou l'autre des logiciels (et essayé aussi imgburn)...

voici le rapport d'erreur de nero si ca peut aider
je suis sous seven graveur asus mis en UDF 2.50 comme recommandé pour ce type de compils
merci d'avance



9053-0180-TLXU-8XK2-6A66-E3LW-****-****

Windows 7 6.1
AMD64
Wow64Process
Nero Version: 16.0.11.0
Internal Version: 16,0,11,0

Recorder : <ASUS BW-16D1HT> FW version: 1.01 - HA 1 TA 0 - 16.0.11.0
Device bus : <> HA 1
Host system bus : <S-ATA>
Drive buffer : 4064kB
Bus Type : via Inquiry data
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD/DVD-ROM : <ASUS BW-16D1HT > FW version: 1.01 - HA 1 TA 0 - 16.0.11.0
Device bus : <> HA 1
Host system bus : <S-ATA>

=== Scsi-Device-Map ===
ArrayPeripheral : MARVELL Virtual Device 1.00 mv61xx Port 0 ID 20 DMA: Off
: Corsair Force GT 1.3. iaStorA Port 1 ID 0 DMA: Off
: ASUS BW-16D1HT 1.01 iaStorA Port 1 ID 0 DMA: Off
: WDC WD1002FAEX-00Z3A05.0 iaStorA Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
ASUS BW-16D1HT D: CdRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 4095MB (4194303kB)
Free physical memory: 4095MB (4194303kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Global Bus Type: default (0)
Check supported media : Disabled (0)

18.12.2015
Compilation UDF
19:25:35 #1 Text 0 File SCSIPTICommands.cpp, Line 617
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

19:25:35 #2 Text 0 File Isodoc.cpp, Line 7684
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : manual
UDF Revision : 2.50
UDF Partition Type : physical

19:25:35 #3 PHASE 214 File dlgbrnst.cpp, Line 2088
Generation of disc structures started

19:25:35 #4 Text 0 File compose.cpp, Line 970
GenUDF2: 1 transfer items prepared.

19:25:35 #5 PHASE 215 File dlgbrnst.cpp, Line 2088
Generation of disc structures completed

19:25:35 #6 Text 0 File Burncd.cpp, Line 3816
Turn on Disc-At-Once, using CD-R/RW; DVD R/RW; DVD DL; DVD-RAM; BD-R/RE; BD DL; BDXL media

19:25:35 #7 Text 0 File DlgWaitCD.cpp, Line 335
[D: BW-16D1HT ] Total disc capacity: 12219392 23866MB
User data to be written: 11199968 21874MB
Free space on disc: 12219392 23866MB

19:25:35 #8 Text 0 File DlgWaitCD.cpp, Line 347
[D: BW-16D1HT ] Write in overburning mode: NO (enabled: CD)

19:25:35 #9 Text 0 File DlgWaitCD.cpp, Line 3087
Recorder: ASUS BW-16D1HT, Media type: BD-R (seq)

19:25:35 #10 Text 0 File DlgWaitCD.cpp, Line 537
[D: BW-16D1HT ] >>> Protocol of DlgWaitCD activities: <<<
=========================================

19:25:35 #11 Text 0 File ThreadedTransferInterface.cpp, Line 879
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 11199968 (11199968) = #11199968/2488:52.68
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 11199968 blocks [D: ASUS BW-16D1HT]
--------------------------------------------------------------

19:25:35 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1095
Prepare [D: ASUS BW-16D1HT] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 22937534464, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 11199968 | 0 | 0x00
11199968 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
MediaType: BD-R

19:25:35 #13 Text 0 File SCSIPTICommands.cpp, Line 404
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

19:25:35 #14 Text 0 File Burncd.cpp, Line 4712
Caching options: cache CDRom or Network-No, small files-No (<64KB)

19:25:35 #15 PHASE 36 File dlgbrnst.cpp, Line 2088
Burn process started at 4x (17 980 Ko/s)

19:25:35 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2926
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

19:25:35 #17 Text 0 File Cdrdrv.cpp, Line 10814
---- Disc Structure (BD): Disc Information on BD (00h) ----
Media Type: 1, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 4098
--- Header ---
Disc Information Identifier: <DI>
Disc Information Format: 01 h
Number of DI Units/Aux Frames in each DI block: 5
Number of (recording) layer to which this DI Unit applies: 0
DI unit Sequence Number in DI Block: 0
Continuation flag: Next DI Unit is the start of a new set of parameters (0)
Number of DI bytes in use in this DI unit: 98
--- Body ---
Disc Type Identifier: <BDR>
Disc Size/Class/Version: 1
DI Unit Format dependent contents:
BD Structure: 18 (12 h):
1 recording layer (SL), BD-R
Hybrid Disc identifier/Channel bit length: 1 (1 h):
no DVD layer present, no CD layer present
channel bit length of 74,5 nm (25.0 GB max. per layer)
Push-Pull polarity flag bits: 01 h
Recorded mark polarity flag bits: 01 h
BCA descriptor: BCA-code present (1)
Maximum transfer rate needed by the application: 0 Mbit/s
Data zone allocation:
First Physical ADIP Address of the Data Zone of the related layer (FAA): 00020000 h (131072)
Last Physical ADIP Address of the Data Zone of the related layer (LAA): 00194E7E h (1658494)
Recording velocities:
Nominal Recording Velocity: 4.92 m/s (1EC h)
Maximum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
Minimum Recording Velocity: 4.92 m/s (64 h -> 100/100)=1
...
12 01 01 01 01 00 00 00 - 00 00 00 00 00 02 00 00
00 19 4E 7E 01 EC 64 64 - 28 28 28 28 1E 1E 1E 1E
00 00 00 00 48 46 73 04 - 04 20 1E 6E A0 08 08 08
08 00 00 00 00 00 00 00 - 00 60 00 60 00 60 00 60
00 58 00 58 00 58 00 58 - 00 60 00 60 00 60 00 60
00 A0 A0 A0 A0 A0 00 00
--- Trailer ---
Disc Manufacturer ID: 56 45 52 42 41 54 h <VERBAT>
Media Type ID: 49 4D 75 <IMu>
Time Stamp [m:y]: 6 : 2012 (7D C6 h)
Product Revision Number: 0

19:25:35 #18 SPTI -1066 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x0e072ec0: Len x648

19:25:35 #19 Text 0 File BD.cpp, Line 416
Allocated spare area size on disc 620000h
BD: Start write address at LBA 0, Recording mode: unknown Recording Mode (0),
spare area allocation: default (no action) (0), Stream recording: NO (0); return code 0

19:25:35 #20 Text 0 File ThreadedTransfer.cpp, Line 275
Pipe memory size 83836800

19:25:35 #21 Text 0 File CUDFTransferItem2.cpp, Line 713

GenUDF2 FS Layout:
=-=-=-=-=-=-=-=-=-=-
Sectors to be written: 11199968
Session Start: Sector 0
Volume Structure: Sector [0, 287] (288 Sectors)
Before Meta Data: Sector [288, 319] (32 Sectors)
Meta Data: Sector [320, 511] (192 Sectors)
Data: Sector [512, 11199452] (11198941 Sectors)
After Data: Sector [11199453, 11199647] (195 Sectors)
Trailer Track: Sector [11199648, 11199967] (320 Sectors)

GenUDF2 Parameters:
=-=-=-=-=-=-=-=-=-=-
PrepTime: 12-18-2015 19:25:35
UDF Revision: 2.50
UDF Partition Type: Physical
UDF Special Mode: None
Bytes per Sector: 2048
Session Start: 0
Physical Partition Start: -1
Total Capacity: 12219392
Multi Session Mode: None
Disc Type: BD-R
OS Class: 5
Volume ID: Nouveau
Allow Unicode Labels: 0
Duplicate Meta Data: 1
MS Info File: 00000000
VMS Rollback File: 00000000
Create ISO bridge: 0
ECC Block Length: 32
Sparing Packet Length: 32
Allocation Unit Size: 32
Alignment Unit Size: 32
Make Writable: 0
Access Type: Read-only

19:26:06 #22 SPTI -1135 File SCSIPassThrough.cpp, Line 225
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x104c0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

19:26:06 #23 TRANSFER -20 File ThreadedTransfer.cpp, Line 1235
Could not perform Write

19:26:06 #24 CDR -1135 File Writer.cpp, Line 340
Write error
D: ASUS BW-16D1HT

19:26:57 #25 Text 0 File DVDPlusDualLayer.cpp, Line 1464
SetDriveCaps: Set LAST LBA of layer 1 to 0

19:26:57 #26 PHASE 38 File dlgbrnst.cpp, Line 2088
Burn process failed at 4x (17 980 Ko/s)

19:26:57 #27 Text 0 File SCSIPTICommands.cpp, Line 454
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

19:26:57 #28 Text 0 File Cdrdrv.cpp, Line 12266
DriveLocker: UnLockVolume completed

19:26:57 #29 Text 0 File SCSIPTICommands.cpp, Line 617
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

[SG1]

Bonjour

Bienvenue sur le forum de Ri4m...

Pour ma part, je ne grave plus depuis longtemps, car ça revient beaucoup plus cher que la sauvegarde sur HDD...

1 - Passe en revue ce que tu as installé entre le moment ou ça marchait et ou ça marchait plus
2 - Analyse Antivirus / Antispyware avec Malwarebytes et ton antivirus traditionnel (Eventuellement AdwCleaner)
3 - Réinstaller les logiciels de gravure
4 - Tenter une restauration système à une date antérieure (au moment ou ça marchait, et en prenant soin de faire des sauvegardes avant...)

Un point important : As-tu déjà fait des gravures de film AVI ou MP4 sur des Bluray ?
Perso, j'avais déjà fait sur CD et DVD, mais j'ai des doutes pour le support Bluray qui est spécial...
...Je vais essayer de me renseigner.

Là tu affiches le rapport complet, mais le message d'erreur en début que tu dis avoir doit être plus court.
Peux-tu en faire une capture d'écran ?

@+
SG1

[chipo1982]

bonjour et merci

j'ai deja tout essayé....
j'ai juste un message erreur et cest tout
j'ai l'impression egalement qu'il n'y a aucune mise en tampon dans nero...

[SG1]

Bonjour,

Ben, si tu as tout essayé dans la liste que j'ai donné, je ne vois qu'une seule solution.

Faire une sauvegarde de tous tes fichiers perso importants (photo, doc, video, adresse mail, mail, favoris...) et faire une réinstallation complète de ton système...

Désolé de ne pouvoir t'aider plus...

@+